Coatings, not demolition
The concrete you already have, made new on top
Most concrete complaints are surface complaints: stains that will not lift, a dusty gray finish, pitting, and the scars of old patches. Breaking the slab out and pouring a new one is the expensive answer and usually the unnecessary one. We are a coatings contractor, so we fix the surface. Grind it open, deal with the cracks and pinholes, then bond a new wear layer over the top that carries the traffic instead of the concrete.
Moisture is what decides how long that layer lasts around here. This side of Harris County sits on the Clodine soil series, which the USDA soil survey describes as very deep, nearly level and somewhat poorly drained, under a county that takes roughly 49 inches of rain a year. Water sits under slabs here and can push up through them as vapor, so the concrete gets tested before a system is chosen rather than after it has lifted.
Pro Level Floor Coatings does not pour or repair concrete, and no coating can hold a moving slab together. If yours is heaving or failing right through, James says so rather than selling you a finish that hides it for a season. If it is sound, begin with concrete resurfacing in Houston.
A new profile, honestly
What Houston customers will tell you
What we handle
Concrete Coating Services in Houston
Concrete Resurfacing
Resurfacing gives a sound but tired slab a brand new wear surface without the demolition, the dumpster, or the wait for concrete to cure. The old surface is ground open, repaired and coated, so what you walk on is new right across the floor. Here is what is involved in how resurfacing works.
Concrete Sealing
A sealed floor stops drinking in everything that lands on it. Oil, brake fluid, water and dust sit on top where a mop can reach them instead of soaking into the slab and staying there for good. Sealing is also the last step that protects the finish underneath it. See how we handle concrete sealing.
Think your slab is past saving?
Send a photo or let James come and look. If a coating is the right answer you will be told, and if it is not you will be told that too.
Call (346) 278-3376Ask the guy doing the work
Straight answers about your floor coating questions
Do you pour new concrete?
No. Pro Level Floor Coatings works on concrete that is already there. We grind it, repair the surface, resurface and seal. If you need a slab poured or repaired, you need a different trade.
What is the difference between resurfacing and sealing?
Resurfacing puts a new wear surface over the slab so it looks and behaves like new concrete. Sealing puts a clear protective layer over the surface you have so it stops absorbing stains. Plenty of floors get both.
Will resurfacing hide my cracks?
Cracks are repaired before the new surface goes on so they do not show through. If a crack is still moving, you get told, because no surface treatment can hold a slab that is shifting.
Why does ground moisture matter so much in Houston?
Slabs here sit on deep, poorly drained soil in a county that takes a lot of rain, so water sits underneath them. That moisture can travel up through the concrete and push a coating off from below, which is why the slab gets tested before a system is picked.
Can you coat a patio or a walkway?
Yes, as long as the concrete is sound. Outdoor slabs get a finish with more texture in it for grip, and the same grinding and bonding steps apply. We coat existing concrete, we do not pour it.
Do you work on commercial concrete?
Yes. Shop floors, service bays, pole barns and light warehouse slabs all get resurfaced and sealed the same way, with the system matched to the traffic the floor takes.